Trinidad Rig 71

Trinidad Rig 71 Inventory (3200 m)

Substructure Mastco Substructure (S/N 97-4881-S) 5.50 mKB with 115,000 daN pipe setback and
133,000 daN table load
Mast 32 m (108') Cantilever mast (double) (S/N 97-4881-M) with 151, 000 dan hook load with 8 lines. Top Drive lugs are in place and mast will readily accommodate a top drive.
Drawworks Alco 750 HP drawworks with 36" Single Disk Eaton brake and hydraulic catheads (S/N 001) powered by Cat 3406E (575 HP) engine (S/N 6BOO558) with Allison 6-speed Transmission
(S/N 3110087119). National 175, 444.5 mm (17.5") rotary table.
Mud Pumps 2 Gardner Denver PZ-8 mud pumps (#1 S/N 761622, #2. 90052) unitized in separate buildings, each powered by a Cat 398 (850 HP) engine (#1 S/N 66B5369, #2 35Z713)
Mud Tanks Jayco 112 cubic meter ( 87m3 useable ), 5-compartment mud tank with (3) 60 HP magnum pump low pressure systems c/w 30" Poor Boy Degasser
Shale Shakers 2-Brandt King Cobra high volume linear shakers with screen to 300 mesh
Generators 2- Cat 3406 (365 kw) Gen Sets (S/N 9DR01961)
B.O.P 228 mm (9") MPA 21,000 kpa (3000 psi) Townsend BOP consisting of 2 single gate
(#1 S/N 8812098, #2 8812098) and one annular (S/N 9A6498) functioned by a Oilco 80 gallon air over hydraulic 5 station accumulator with electric controlled remote station in dog house
Watertank/Doghouse 10 m x 3 m doghouse, 90 m3 Water tank, 20, 000 L Fuel Tank
Block/Hook Alco 250 Ton Block and Hook assembly with 28.6 mm (1 1/8") Drilling Line (S/N 007)
Swivel Emsco LB-200 Ton (S/N 3783)
Handling Tools 1 Varco SSW 30 Pipe Spinner and 1 T.P 77 Kelly Spinner
Drill Pipe 2688 m of 114.3 mm x 24.71 kg/m Drill Pipe w/ 4 ½" XH Connection (Premium) (283 Jts )
Drill Collars 21 - 167mm Drill Collars
2 - 228mm Drill Collars
Boiler 100 hp Volcano ( SN 10075-5 )

Back to Drilling and Service Rigs