Trinidad Rig 72E
  |
Trinidad Rig 72E Inventory (4600 m)
| Substructure | Cassidy Engineering 2-Piece high floor substructure with 5.8 m (19') below beam working clearance, 222 000 dAN table rating with 200 000 dAN setback rating. |
| Mast | Cassidy Engineering Triple Cantilever beam leg. Nominal hook load 253 000 dAN with 10 lines. Top drive lugs are in place and mast will readily accommodate a top drive. |
| Drawworks | Continental Emsco D-2E, Lebus grooved with 31.75 mm (1 ¼") drill line, hydraulic catheads, Varco pipe spinner and a double 36" Eaton Auxiliary brake unitized with a National 275 (698.5 mm) rotary table; all powered with a GE 752 series 1000 H.P. motor with an Ameramex 10 H.P. blower. |
| Mud Pumps | 2 Oilwell A-1100-PT Triplex pumps 254 mm (10" stroke). Powered by GE 752 Traction motors. |
| Mud Tanks | 2 tank system, 188 m3 (1100 bbls) capacity with (2) 5 x 6"- 60 H.P. Mission Magnum Pump Low-Pressure system. Pre-Fab Roof available for Invert. |
| Degasser | Twin 914 mm degasser with a capacity of 24.63 m3. (101mm inlets with 254mm outlets) |
| Shale Shakers | 2 FSI Series 4236 3P Linear Motion Shaker |
| Generators | 3 Detroit 12V2000 engines with (3) 950 kW Stamford generators controlled with a IDM 3-bay, 600 Volt SCR system |
| B.O.P | 356 mm (13 5/8") x 34,000 kpa (5000 psi) Shaffer Spherical (Nace Trim) 356 mm (13 5/8") x 34,000 kpa (5000 psi) Shaffer Single Gates (Nace Trim) 356 mm (13 5/8") x 34,000 kpa (5000 psi) Spools with 3 1/8 " outlets (Nace Trim) |
| Accumulator | Valvcon 605.7 L (160 gallon) 7 station with shear ram isolation station. Controlled with PLC from driller's console complete with remote stripping regulator. |
| Drill Pipe | 2900, 114 mm (4-1/2" 24.73kg/m) Grade TSS95, fine particle hardband with TK 34 internal coating (4-1/2" XH connection) 1520 m, 114 mm (4-1/2" 29.80 kg/m) Grade TSS95, fine particle hardband with TK 34 internal coating (4-1/2" XH connection) |
| Drill Collars | 21 159 mm (6-1/4") with 4-1/2" XH connections. Single zipped for Slips. 3 Joints 9" with 7-5/8" regular connections |
| Block/Hook | ALCO 350 t Block with a BJ 6350 Hook |
| Swivel | Emsco LB 400 with and Omsco5 ¼" Hex Kelly and Varco HDP pin drive Kelly bushing, with a Tillery and Parks forward and reverse Kelly Spinner. |
| Watertank/Doghouse | 10 m x 3 m Doghouse, 96 m3 (600 bbl) water tank and 30,000 fuel tank |
| Boiler | 100 H.P. Volcano 3 pass with 5, 678 L (1500 gal) fuel tank and 17, 344 L (150 bbl) water tank. |
| Loads | 36 with boiler and push shack, with no cranes needed and moves in 1 Day. |
Back to Drilling and Service Rigs